AISI T5 Balls
Ball Bearing
Tungsten High-Speed Steel, Wear-Resistant & Heat-Stable
AISI T5 balls from Atlas Ball & Bearing are precision-engineered from premium tungsten high-speed tool steel, offering outstanding wear resistance, excellent hardness, and reliable heat stability. These balls are ideally suited for tooling and industrial applications where durability and consistent performance are essential.
Manufactured from high-quality AISI T5 steel, these balls maintain their hardness at elevated temperatures and perform effectively under high-speed and abrasive conditions. They provide a dependable solution for demanding environments where standard steels may fail.
150
Precision Ball Diameter
Why Choose AISI T5 Balls?
AISI T5 is a tungsten-based high-speed tool steel known for its strong wear resistance, good hot hardness, and reliable toughness. It is well-suited for applications where components are exposed to heat and friction but do not require the extreme performance of higher-alloy grades like T15.
AISI T5 balls offer a balance of durability, performance, and cost-effectiveness, making them a practical choice for a wide range of industrial and tooling applications.
Key Benefits
-
High hardness and good wear resistance
-
Reliable hot hardness and heat tolerance
-
Strong resistance to abrasion and surface wear
-
Good toughness under load
-
Consistent dimensional stability
-
Cost-effective alternative to higher alloy high-speed steels
-
Suitable for medium to high-speed and load applications
Manufacturing & Supply
We are capable of manufacturing and supplying loose AISI T5 steel balls in nearly every variation of grade, maintaining an extensive stock with sizes ranging from 0.2mm to 150mm in diameter.
Please feel free to rate our products and service or send us your comments by using our form opposite →
Additionally, we offer a bespoke ball manufacturing service, which follows the same process controls and traceability but uses a customer’s own material. For further details, please email us or call +44 (0) 1922 710515.
Applications
AISI T5 balls are commonly used in environments requiring reliable wear resistance and heat stability.
Typical applications include:
- Tooling and cutting applications
- Medium to high-speed industrial machinery
- Precision components in abrasive environments
- General engineering and wear-resistant parts
- Automotive and mechanical systems
- Metalworking and fabrication equipment
AISI T5 balls are available in a variety of sizes and tolerances to meet both general-purpose and precision engineering requirements.
Why Atlas Ball & Bearing?
- UK-based manufacturer and global supplier of precision steel balls
- Extensive stock with fast UK and international delivery
- Wide range of sizes, grades, and tolerances
- Expertise in high-speed tungsten tool steels
- Consistent quality, surface finish, and full material traceability
Related Materials
Useful terms and definitions
Batch or Lot:
A defined quantity of balls manufactured under conditions presumed to be uniform and which is considered an entity.
Nominal Ball Diameter:
The diameter value that is used for the general identification of a ball size.
Single Ball Diameter:
The distance between two parallel planes tangential to the actual ball surface.
Diameter Tolerance per Batch:
The allowed difference between the smallest measured ball diameter and the largest ball diameter within the same batch or lot quantity.
Sphericity:
A measure of roundness expressed as the difference between the measured roundness of a ball and a theoretically perfectly round ball.
Surface Finish or Roughness:
A measure of the texture of a surface. It is quantified by the vertical deviations of the actual surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth.
Ball Grades
| Grade | Diameter Tolerance per Ball | Sphericity | Diameter Tolerance per Unit Container | Basic Diameter Tolerance | Maximum Surface Roughness Micro | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | µ | Inch | µ | Inch | µ | Inch | µ | Inch | µ | |
| 3 | .000003 | 0.076 | .000003 | 0.076 | .000005 | 0.127 | ±.00003 | ± 0.076 | 0.5 | 0.013 |
| More details about Grade 3... | ||||||||||
| 5 | .000005 | 0.127 | .000005 | 0.127 | .00001 | 0.25 | ±.00005 | ± 0.127 | 0.8 | 0.02 |
| More details about Grade 5... | ||||||||||
| 10 | .000010 | 0.25 | .000010 | 0.25 | .00002 | 0.51 | ±.0001 | ± 2.5 | 1.0 | 0.025 |
| More details about Grade 10... | ||||||||||
| 15 | .000015 | 0.38 | .000015 | 0.38 | .00003 | 0.76 | ±.0001 | ± 2.5 | 1.2 | 0.03 |
| More details about Grade 15... | ||||||||||
| 25 | .000025 | 0.63 | .000025 | 0.63 | .00005 | 1.27 | ±.0001 | ± 2.5 | 1.5 | 0.038 |
| More details about Grade 25... | ||||||||||
| 50 | .00005 | 1.27 | .00005 | 1.27 | .0001 | 2.5 | ±.0002 | ± 5 | 3.0 | 0.075 |
| More details about Grade 50... | ||||||||||
| 100 | .0001 | 2.5 | .0001 | 2.5 | .0002 | 5 | ±.0005 | ± 5 | 5.0 | 0.125 |
| More details about Grade 100... | ||||||||||
| 200 | .0002 | 5 | .0002 | 5 | .0004 | 10 | ±.0010 | ± 10 | 8.0 | 0.2 |
| More details about Grade 200... | ||||||||||
| 300 | .0003 | 7.5 | .0003 | 7.5 | .0006 | 15 | ±.0015 | ± 37.5 | N/A | N/A |
| More details about Grade 300... | ||||||||||
| 500 | .0005 | 12.5 | .0005 | 12.5 | .001 | 25 | ±.002 | ± 50 | N/A | N/A |
| More details about Grade 500... | ||||||||||
| 1000 | .001 | 25 | .001 | 25 | .002 | 50 | ±.005 | ± 125 | Not Applicable | Not Applicable |
| More details about Grade 1000... | ||||||||||
| 2000 | .002 | 50 | .002 | 50 | .004 | 100 | ±.005 | ± 125 | N/A | N/A |
| More details about Grade 2000... | ||||||||||
Sample Our Work!
Take the first step towards precision and quality with our expert services. At Atlas Ball & Bearing, we’re committed to delivering top-notch precision balls and rollers for a wide range of industries, including gas, oil, medical, and transportation. Our dedicated team is ready to assist you with custom solutions tailored to your specific needs. Experience the Atlas Ball & Bearing difference now!