HDPE Balls
Ball Bearing
High-Density, Durable, and Chemically Resistant
HDPE (High-Density Polyethylene) balls from Atlas Ball & Bearing are strong, lightweight plastic spheres offering excellent chemical resistance, low moisture absorption, and outstanding impact strength.
Their high density gives them superior durability compared to other polyethylene grades, making them ideal for valves, pumps, bearings, and float applications in harsh or corrosive environments.
150
Precision Ball Diameter
Why Choose HDPE Balls?
HDPE (High-Density Polyethylene) is a versatile thermoplastic known for its balance of toughness, stability, and low friction. It combines chemical and corrosion resistance with impact strength and lightweight performance, making it an ideal choice for both industrial and fluid-handling systems.
Key Benefits
-
High density and strength — more rigid and durable than LDPE or polypropylene
-
Excellent chemical and corrosion resistance
-
Low water absorption for consistent performance in wet or submerged environments
-
Resistant to most acids, alkalis, and solvents
-
Lightweight, low-friction surface for smooth operation in mechanical systems
-
Cost-effective and long-lasting plastic solution
Manufacturing & Supply
We are capable of manufacturing and supplying loose HDPE balls in nearly every variation of grade, maintaining an extensive stock with sizes ranging from 0.2mm to 150mm in diameter.
Please feel free to rate our products and service or send us your comments by using our form opposite →
Additionally, we offer a bespoke ball manufacturing service, which follows the same process controls and traceability but uses a customer’s own material. For further details, please email us or call +44 (0) 1922 710515.
Applications
Because of its toughness, chemical resistance, and low weight, HDPE balls are used across a wide range of industries, including:
Valves and pumps for corrosive or aqueous systems
Floatation devices and fluid level gauges
Bearings and rollers in non-metallic assemblies
Flowmeters and chemical dosing equipment
Medical, food processing, and water treatment systems
Spacers and insulators where electrical isolation and chemical inertness are important
HDPE balls perform reliably where metals or other plastics may corrode, absorb moisture, or deform.
Why Atlas Ball & Bearing?
UK-based supplier of precision-engineered HDPE and thermoplastic balls
High-density polyethylene materials sourced for strength and consistency
Custom diameters, tolerances, and grades available on request
Quality assurance and batch traceability on every order
Fast UK and international delivery
Related Materials
f you require a material with different mechanical or thermal characteristics, consider these alternatives:
Useful terms and definitions
Batch or Lot:
A defined quantity of balls manufactured under conditions presumed to be uniform and which is considered an entity.
Nominal Ball Diameter:
The diameter value that is used for the general identification of a ball size.
Single Ball Diameter:
The distance between two parallel planes tangential to the actual ball surface.
Diameter Tolerance per Batch:
The allowed difference between the smallest measured ball diameter and the largest ball diameter within the same batch or lot quantity.
Sphericity:
A measure of roundness expressed as the difference between the measured roundness of a ball and a theoretically perfectly round ball.
Surface Finish or Roughness:
A measure of the texture of a surface. It is quantified by the vertical deviations of the actual surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth.
Ball Grades
| Grade | Diameter Tolerance per Ball | Sphericity | Diameter Tolerance per Unit Container | Basic Diameter Tolerance | Maximum Surface Roughness Micro | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | µ | Inch | µ | Inch | µ | Inch | µ | Inch | µ | |
| 3 | .000003 | 0.076 | .000003 | 0.076 | .000005 | 0.127 | ±.00003 | ± 0.076 | 0.5 | 0.013 |
| More details about Grade 3... | ||||||||||
| 5 | .000005 | 0.127 | .000005 | 0.127 | .00001 | 0.25 | ±.00005 | ± 0.127 | 0.8 | 0.02 |
| More details about Grade 5... | ||||||||||
| 10 | .000010 | 0.25 | .000010 | 0.25 | .00002 | 0.51 | ±.0001 | ± 2.5 | 1.0 | 0.025 |
| More details about Grade 10... | ||||||||||
| 15 | .000015 | 0.38 | .000015 | 0.38 | .00003 | 0.76 | ±.0001 | ± 2.5 | 1.2 | 0.03 |
| More details about Grade 15... | ||||||||||
| 25 | .000025 | 0.63 | .000025 | 0.63 | .00005 | 1.27 | ±.0001 | ± 2.5 | 1.5 | 0.038 |
| More details about Grade 25... | ||||||||||
| 50 | .00005 | 1.27 | .00005 | 1.27 | .0001 | 2.5 | ±.0002 | ± 5 | 3.0 | 0.075 |
| More details about Grade 50... | ||||||||||
| 100 | .0001 | 2.5 | .0001 | 2.5 | .0002 | 5 | ±.0005 | ± 5 | 5.0 | 0.125 |
| More details about Grade 100... | ||||||||||
| 200 | .0002 | 5 | .0002 | 5 | .0004 | 10 | ±.0010 | ± 10 | 8.0 | 0.2 |
| More details about Grade 200... | ||||||||||
| 300 | .0003 | 7.5 | .0003 | 7.5 | .0006 | 15 | ±.0015 | ± 37.5 | N/A | N/A |
| More details about Grade 300... | ||||||||||
| 500 | .0005 | 12.5 | .0005 | 12.5 | .001 | 25 | ±.002 | ± 50 | N/A | N/A |
| More details about Grade 500... | ||||||||||
| 1000 | .001 | 25 | .001 | 25 | .002 | 50 | ±.005 | ± 125 | Not Applicable | Not Applicable |
| More details about Grade 1000... | ||||||||||
| 2000 | .002 | 50 | .002 | 50 | .004 | 100 | ±.005 | ± 125 | N/A | N/A |
| More details about Grade 2000... | ||||||||||
Sample Our Work!
Take the first step towards precision and quality with our expert services. At Atlas Ball & Bearing, we’re committed to delivering top-notch precision balls and rollers for a wide range of industries, including gas, oil, medical, and transportation. Our dedicated team is ready to assist you with custom solutions tailored to your specific needs. Experience the Atlas Ball & Bearing difference now!