AISI 430F Balls
Ball Bearing
Free-Machining Ferritic Stainless Steel
AISI 430F balls from Atlas Ball & Bearing are precision-engineered from free-machining ferritic stainless steel, offering good corrosion resistance, improved machinability, and reliable magnetic properties. These balls are ideal for applications where efficient production, consistent performance, and cost-effectiveness are key.
Manufactured from high-quality AISI 430F stainless steel, these balls contain added sulphur to enhance machinability, making them easier to produce to tight tolerances. They perform well in mildly corrosive environments and are commonly used in industrial and engineering applications.
150
Precision Ball Diameter
Why Choose AISI 430F Balls?
AISI 430F is a free-machining variation of AISI 430 stainless steel, developed to provide improved machinability while maintaining good corrosion resistance and magnetic properties. The addition of sulphur allows for more efficient manufacturing, making it a cost-effective solution for high-volume production.
AISI 430F balls are well suited to applications where moderate corrosion resistance and precision manufacturing are required, without the need for higher alloy stainless steels.
Key Benefits
-
Good corrosion resistance in mild environments
-
Excellent machinability for precise manufacturing
-
Magnetic (ferromagnetic) properties
-
Cost-effective stainless steel option
-
Good strength and durability
-
Reliable dimensional accuracy
-
Suitable for high-volume production applications
Manufacturing & Supply
We are capable of manufacturing and supplying loose AISI 430F stainless steel balls in nearly every variation of grade, maintaining an extensive stock with sizes ranging from 0.2mm to 150mm in diameter.
Please feel free to rate our products and service or send us your comments by using our form opposite →
Additionally, we offer a bespoke ball manufacturing service, which follows the same process controls and traceability but uses a customer’s own material. For further details, please email us or call +44 (0) 1922 710515.
Applications
AISI 430F balls are commonly used in applications requiring good machinability and moderate corrosion resistance.
Typical applications include:
- Precision-engineered components
- Automotive and mechanical systems
- Industrial machinery
- Valves and pump components
- Fasteners and fittings
- General engineering and manufacturing
AISI 430F balls are available in a range of sizes and tolerances to meet both standard and precision engineering requirements.
Why Atlas Ball & Bearing?
- UK-based manufacturer and global supplier of precision steel balls
- Extensive stock with fast UK and international delivery
- Wide range of sizes, grades, and tolerances
- Expertise in ferritic and free-machining stainless steels
- Consistent quality, surface finish, and full material traceability
Related Materials
Useful terms and definitions
Batch or Lot:
A defined quantity of balls manufactured under conditions presumed to be uniform and which is considered an entity.
Nominal Ball Diameter:
The diameter value that is used for the general identification of a ball size.
Single Ball Diameter:
The distance between two parallel planes tangential to the actual ball surface.
Diameter Tolerance per Batch:
The allowed difference between the smallest measured ball diameter and the largest ball diameter within the same batch or lot quantity.
Sphericity:
A measure of roundness expressed as the difference between the measured roundness of a ball and a theoretically perfectly round ball.
Surface Finish or Roughness:
A measure of the texture of a surface. It is quantified by the vertical deviations of the actual surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth.
Ball Grades
| Grade | Diameter Tolerance per Ball | Sphericity | Diameter Tolerance per Unit Container | Basic Diameter Tolerance | Maximum Surface Roughness Micro | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | µ | Inch | µ | Inch | µ | Inch | µ | Inch | µ | |
| 3 | .000003 | 0.076 | .000003 | 0.076 | .000005 | 0.127 | ±.00003 | ± 0.076 | 0.5 | 0.013 |
| More details about Grade 3... | ||||||||||
| 5 | .000005 | 0.127 | .000005 | 0.127 | .00001 | 0.25 | ±.00005 | ± 0.127 | 0.8 | 0.02 |
| More details about Grade 5... | ||||||||||
| 10 | .000010 | 0.25 | .000010 | 0.25 | .00002 | 0.51 | ±.0001 | ± 2.5 | 1.0 | 0.025 |
| More details about Grade 10... | ||||||||||
| 15 | .000015 | 0.38 | .000015 | 0.38 | .00003 | 0.76 | ±.0001 | ± 2.5 | 1.2 | 0.03 |
| More details about Grade 15... | ||||||||||
| 25 | .000025 | 0.63 | .000025 | 0.63 | .00005 | 1.27 | ±.0001 | ± 2.5 | 1.5 | 0.038 |
| More details about Grade 25... | ||||||||||
| 50 | .00005 | 1.27 | .00005 | 1.27 | .0001 | 2.5 | ±.0002 | ± 5 | 3.0 | 0.075 |
| More details about Grade 50... | ||||||||||
| 100 | .0001 | 2.5 | .0001 | 2.5 | .0002 | 5 | ±.0005 | ± 5 | 5.0 | 0.125 |
| More details about Grade 100... | ||||||||||
| 200 | .0002 | 5 | .0002 | 5 | .0004 | 10 | ±.0010 | ± 10 | 8.0 | 0.2 |
| More details about Grade 200... | ||||||||||
| 300 | .0003 | 7.5 | .0003 | 7.5 | .0006 | 15 | ±.0015 | ± 37.5 | N/A | N/A |
| More details about Grade 300... | ||||||||||
| 500 | .0005 | 12.5 | .0005 | 12.5 | .001 | 25 | ±.002 | ± 50 | N/A | N/A |
| More details about Grade 500... | ||||||||||
| 1000 | .001 | 25 | .001 | 25 | .002 | 50 | ±.005 | ± 125 | Not Applicable | Not Applicable |
| More details about Grade 1000... | ||||||||||
| 2000 | .002 | 50 | .002 | 50 | .004 | 100 | ±.005 | ± 125 | N/A | N/A |
| More details about Grade 2000... | ||||||||||
Sample Our Work!
Take the first step towards precision and quality with our expert services. At Atlas Ball & Bearing, we’re committed to delivering top-notch precision balls and rollers for a wide range of industries, including gas, oil, medical, and transportation. Our dedicated team is ready to assist you with custom solutions tailored to your specific needs. Experience the Atlas Ball & Bearing difference now!