Nylon (Polyamide) Balls
Ball Bearing
Lightweight, Tough & Wear-Resistant
Nylon balls from Atlas Ball & Bearing provide an excellent balance of strength, toughness, and low weight. Known for their wear resistance and self-lubricating properties, nylon precision balls are ideal for applications requiring smooth motion, reduced friction, and dependable performance under moderate loads.
Manufactured from engineering-grade polyamide (Nylon), these precision nylon balls offer good impact resistance, dimensional stability, and durability, making them suitable for a wide range of industrial, mechanical, and general engineering applications.
150
Precision Ball Diameter
Why Choose Nylon Balls?
Nylon’s molecular structure delivers a unique combination of toughness, resilience, and wear resistance. Nylon balls perform exceptionally well in applications requiring quiet operation, low friction, and resistance to repeated impact or sliding contact.
They also provide good chemical resistance and electrical insulation properties, making nylon precision balls suitable for both mechanical and electrical environments.
Key Benefits
-
Lightweight yet tough material
-
Excellent wear and abrasion resistance
-
Low coefficient of friction
-
Self-lubricating properties
-
Good impact resistance
-
Electrically insulating
-
Cost-effective engineering polymer
-
Suitable for precision and general-purpose applications
Manufacturing & Supply
We are capable of manufacturing and supplying loose nylon balls in nearly every variation of grade, maintaining an extensive stock with sizes ranging from 0.2mm to 150mm in diameter.
Please feel free to rate our products and service or send us your comments by using our form opposite →
Additionally, we offer a bespoke ball manufacturing service, which follows the same process controls and traceability but uses a customer’s own material. For further details, please email us or call +44 (0) 1922 710515.
Applications
Nylon balls are widely used in applications where toughness, low friction, and durability are required.
Typical applications include:
Bearings and rollers
Valves and flow control components
Gears and mechanical assemblies
Conveyor and automation systems
Electrical and electronic components
Consumer and industrial products
Low- to medium-load mechanical systems
Nylon precision balls are available in multiple grades, diameters, and tolerances to suit soft-motion, wear-resistant, or general-purpose requirements.
Why Atlas Ball & Bearing?
UK-based manufacturer of high-quality nylon balls
Extensive stock with rapid UK and international delivery
Full range of sizes, grades, and tolerances
Expertise in precision polymer ball manufacturing
Consistent quality, dimensional accuracy, and full traceability
Related Materials
Explore other precision engineering polymer balls in the Atlas Ball range:
Useful terms and definitions
Batch or Lot:
A defined quantity of balls manufactured under conditions presumed to be uniform and which is considered an entity.
Nominal Ball Diameter:
The diameter value that is used for the general identification of a ball size.
Single Ball Diameter:
The distance between two parallel planes tangential to the actual ball surface.
Diameter Tolerance per Batch:
The allowed difference between the smallest measured ball diameter and the largest ball diameter within the same batch or lot quantity.
Sphericity:
A measure of roundness expressed as the difference between the measured roundness of a ball and a theoretically perfectly round ball.
Surface Finish or Roughness:
A measure of the texture of a surface. It is quantified by the vertical deviations of the actual surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth.
Ball Grades
| Grade | Diameter Tolerance per Ball | Sphericity | Diameter Tolerance per Unit Container | Basic Diameter Tolerance | Maximum Surface Roughness Micro | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | µ | Inch | µ | Inch | µ | Inch | µ | Inch | µ | |
| 3 | .000003 | 0.076 | .000003 | 0.076 | .000005 | 0.127 | ±.00003 | ± 0.076 | 0.5 | 0.013 |
| More details about Grade 3... | ||||||||||
| 5 | .000005 | 0.127 | .000005 | 0.127 | .00001 | 0.25 | ±.00005 | ± 0.127 | 0.8 | 0.02 |
| More details about Grade 5... | ||||||||||
| 10 | .000010 | 0.25 | .000010 | 0.25 | .00002 | 0.51 | ±.0001 | ± 2.5 | 1.0 | 0.025 |
| More details about Grade 10... | ||||||||||
| 15 | .000015 | 0.38 | .000015 | 0.38 | .00003 | 0.76 | ±.0001 | ± 2.5 | 1.2 | 0.03 |
| More details about Grade 15... | ||||||||||
| 25 | .000025 | 0.63 | .000025 | 0.63 | .00005 | 1.27 | ±.0001 | ± 2.5 | 1.5 | 0.038 |
| More details about Grade 25... | ||||||||||
| 50 | .00005 | 1.27 | .00005 | 1.27 | .0001 | 2.5 | ±.0002 | ± 5 | 3.0 | 0.075 |
| More details about Grade 50... | ||||||||||
| 100 | .0001 | 2.5 | .0001 | 2.5 | .0002 | 5 | ±.0005 | ± 5 | 5.0 | 0.125 |
| More details about Grade 100... | ||||||||||
| 200 | .0002 | 5 | .0002 | 5 | .0004 | 10 | ±.0010 | ± 10 | 8.0 | 0.2 |
| More details about Grade 200... | ||||||||||
| 300 | .0003 | 7.5 | .0003 | 7.5 | .0006 | 15 | ±.0015 | ± 37.5 | N/A | N/A |
| More details about Grade 300... | ||||||||||
| 500 | .0005 | 12.5 | .0005 | 12.5 | .001 | 25 | ±.002 | ± 50 | N/A | N/A |
| More details about Grade 500... | ||||||||||
| 1000 | .001 | 25 | .001 | 25 | .002 | 50 | ±.005 | ± 125 | Not Applicable | Not Applicable |
| More details about Grade 1000... | ||||||||||
| 2000 | .002 | 50 | .002 | 50 | .004 | 100 | ±.005 | ± 125 | N/A | N/A |
| More details about Grade 2000... | ||||||||||
Sample Our Work!
Take the first step towards precision and quality with our expert services. At Atlas Ball & Bearing, we’re committed to delivering top-notch precision balls and rollers for a wide range of industries, including gas, oil, medical, and transportation. Our dedicated team is ready to assist you with custom solutions tailored to your specific needs. Experience the Atlas Ball & Bearing difference now!